岐阜大学工学部機械工学科 　植松研究室 　Department of Mechanical Engineering 　UEMATSU Laboratory 　　【研究活動】 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　最終更新日：2022/9/20 　　国際会議 　　[2022年]　[2021年]　[2020年]　[2019年]　[2018年]　[2017年]　[2016年]　[2015年] 　　[2014年]　[2013年]　[2012年]　[2011年] 　　[2021年] 　　　・　Fatigue behaviour of additively-manufactured Ti-6Al-4V deposited on 　　　　　conventionally-melted base plate (Uematsu Y., Kakiuchi T., Sakai K.), 　　　　　Engineering Integrity Society: Fatigue 2021, Cambridge, England: On-line (2021-3). 　　　・　Nondestructive fatigue damage detection of CFRTP using positron annihilation method 　　　　　(Uematsu Y., Kakiuchi T., Nishizawa N., Ohtani A., Uesugi N., Hattori K.), 　　　　　Proceedings of the Eighth Int. Conf. on Very High Cycle Fatigue (VHCF-8) 　　　　　(CD-ROM), Sapporo, Japan: On-line (2021-7). 　　　・　Joint strengths and fatigue properties of Al/steel dissimilar adhesive joints 　　　　　(Uematsu Y., Kakiuchi T.), Fatigue Design 2021, Senlis, France: On-line (2021-11). 　　[2020年] 　　　・　(Keynote) Fatigue limit prediction of additively-manufactured Ti-6Al-4V (Uematsu Y.), 　　　　　11th International Conference on Mechatronics and Manufacturing (ICMM 2020), 　　　　　Tama, Tokyo, Japan (2020-1). 　　　・　Effect of hybrid structure having additively-manufactured and conventionally-melted 　　　　　parts on fatigue properties of Ti-6Al-4V alloy (Sakai K., Kakiuchi T., Uematsu Y.), 　　　　　Proceedings of the Asian Pacific Conference on Fracture and Strength 2020 (APCFS 　　　　　2020), Jeju, Korea (2020-11). Online conference. 　　　・　Local deformation behavior measurement in tensile test of Al/steel dissimilar FSW 　　　　　joint using DIC (Kosaki M., Kakiuchi T., Niimi K., Uematsu Y.), Proceedings 　　　　　of the Asian Pacific Conference on Fracture and Strength 2020 (APCFS 2020), 　　　　　Jeju, Korea (2020-11). Online conference. 　　　・　Non-destructive fatigue damage inspection of magnesium alloy using positron 　　　　　annihilation method (Hattori R., Kakiuchi T., Uesughi N., Hattori K., Uematsu Y.), 　　　　　Proceedings of the Asian Pacific Conference on Fracture and Strength 2020 　　　　　(APCFS 2020), Jeju, Korea (2020-11). Online conference. 　　　・　Compression-compression fatigue test of lattice-structured Ti-6Al-4V additively 　　　　　manufactured by EBM (Student Paper Aword) (Ohta T., Kakiuchi T., Hojo M., 　　　　　Fujimoto K., Uematsu Y.), Proceedings of the Asian Pacific Conference on 　　　　　Fracture and Strength 2020 (APCFS 2020), Jeju, Korea (2020-11). Online 　　　　　conference. 　　[2019年] 　　　・　Evaluation of fatigue crack propagation near interface of dissimilar Al/Steel friction 　　　　　stir welds (Hashiba K., Ogawa D.,Kakiuchi T., Mizutani Y., Uematsu Y.), The 10th 　　　　　International Conference on Mechatronics and Manufacturing (ICMM 2019), Bangkok, 　　　　　Thailand (2019-1) 　　　・　Fatigue behaviour of type 420J1 martensitic stainless steel additively 　　　　　manufactured by laser metal deposition (Sano R., Kakiuchi T., Yamamoto S., Sasaki R., 　　　　　Uematsu Y.), The 10th International Conference on Mechatronics and Manufacturing 　　　　　(ICMM 2019), Bangkok, Thailand (2019-1). 　　　・　(Keynote) Fatigue properties of severely-deformed light weight alloys (Uematsu Y.), 　　　　　The 10th International Conference on Mechatronics and Manufacturing 　　　　　(ICMM 2019), Bangkok, Thailand (2019-1). 　　　・　(Keynote) High cycle fatigue behavior of multi-directionally forged commercial purity 　　　　　grade 2 Ti plate in laboratory air and Ringer's solution (Uematsu Y., Kakiuchi T., 　　　　　Miura H., Fukihara T.), 13th International Conference on Mechanical Behavior of 　　　　　Materials (ICM13), Melbourne, Australia (2019-6). 　　　・　(Plenary) Fatigue behavior of additively-manufactured (AMed) materials (Uematsu Y.), 　　　　　4th International Conference on Materials Technology and Applications 　　　　　(ICMTA2019), Kyoto, Japan (2019-10). 　　　・　Relationship between defect size and fatigue limit in Ti-6Al-4V with artificial defects 　　　　　(Uematsu Y., Kakiuchi T., Nakajima M.), Fatigue Design 2019, Senlis, France 　　　　　(2019-11). 　　　・　Fatigue properties of additively-manufactured maraging steel deposited on 　　　　　conventionally-melted plate (Matsuo K.,, Kakiuchi T., Akita M., Uematsu Y.), 　　　　　The 9th TSME International Conference on Mechanical Engineering (TSME-ICoME 　　　　　2019), Pattaya, Thailand (2019-12). 　　　・　Tensile-shear properties of dissimilar adhesive joints between aluminum and 　　　　　stainless sheets and effect of aluminum sheet thickness (Ozeki Y., Kakiuchi T., 　　　　　Uematsu Y.), The 9th TSME International Conference on Mechanical Engineering 　　　　　(TSME-ICoME 2019), Pattaya, Thailand (2019-12). 　　　・　Fatigue properties of die-press-worked Al/steel dissimilar friction stir welds 　　　　　(Miyata R., Kakiuchi T., Tsukamoto S., Uematsu Y.), The 9th TSME International 　　　　　Conference on Mechanical Engineering (TSME-ICoME 2019), Pattaya, Thailand 　　　　　(2019-12) 　　　・　(Poster) Comparison of ratigue properties between extruded and cast Al alloys 　　　　　(Isono T., Kakiuchi T., Amago T., Suzuki T., Nishikohri H., Uematsu Y.), The 9th 　　　　　TSME International Conference on Mechanical Engineering (TSME-ICoME 2019), 　　　　　Pattaya, Thailand (2019-12). 　　　・　(Poster) Fatigue strength of dissimilar FSSW joint between Al alloy and CFRP 　　　　　(Satoh T., Kakiuchi T., Hirooka N., Ohtani A., Mizutani Y., Ogawa D,, 　　　　　Nishigaki Y., Kiriyama D., Uematsu Y.), The 9th TSME International 　　　　　Conference on Mechanical Engineering (TSME-ICoME 2019), Pattaya, Thailand 　　　　　(2019-12) 　　　・　(Poster) Effect of corona bond length on fatigue behavior of resistance spot 　　　　　welded mild steel sheet (Igarashi T., Kakiuchi T., Kawabe N., Okita Y., Matsuda H., 　　　　　Tagawa T., Uematsu Y.), The 9th TSME International Conference on Mechanical 　　　　　Engineering (TSME-ICoME 2019), Pattaya, Thailand (2019-12). 　　[2018年] 　　　・　Effect of defects on fatigue strength of additively manufactured Ti-6Al-4V alloy at 　　　　　elevated temperature (Kakiuchi T., Uematsu Y., Nakajima M., Hojo M., Fujimoto K., 　　　　　Han Y.), The 12th International Fatigue Congress (FATIGUE2018), Poitier, France 　　　　　(2018-5). 　　　・　Micro-cantilever fatigue tests using multi-directionally forged AZ61 magnesium alloy 　　　　　(Uematsu Y., Kakiuchi T., Miura H.), The 12th International Fatigue Congress 　　　　　(FATIGUE2018), Poitier, France (2018-5). 　　　・　Relationship between defects and fatigue strength in conventionally and additively 　　　　　manufactured Ti-6Al-4V (Han Y., Kakiuchi T., Hojo M., Fujimoto K., Nakajima M., 　　　　　Uematsu Y.), 2nd International Conference on Structural Integrity and Durability 　　　　　(ICSID 2018), Dubrovnik, Croatia (2018-9). 　　　・　Fabrication of Al alloy/CFRP dissimilar friction stir spot welding joint and fatigue 　　　　　property Kiriyama D., Kakiuchi T., Hirooka N., Ohtani A., Uematsu Y.), 2nd 　　　　　International Conference on Structural Integrity and Durability (ICSID 2018), 　　　　　Dubrovnik, Croatia (2018-9). 　　　・　Local strain evolution during fatigue in Al-Mg-Sc FSW joint welded under different 　　　　　conditions (Matsuo K., Kakiuchi T., Besel Y., Besel M., Ulises Alfaro Mercado, 　　　　　Uematsu Y.), 2nd International Conference on Structural Integrity and Durability 　　　　　(ICSID 2018), Dubrovnik, Croatia (2018-9). 　　　・　Non-destructive fatigue damge evaluation in spring steel by positron annihilation 　　　　　method (Nishikori H., Kakiuchi T., Uesugi N., Hattori K., Uematsu Y.), 2nd 　　　　　International Conference on Structural Integrity and Durability (ICSID 2018), 　　　　　Dubrovnik, Croatia (2018-9). 　　　・　Fatigue crack initiation mechanism in maguesium alloy AZ31 at stress ratio of -0.5 　　　　　(Suzuki K., Kakiuchi T., Tamada K., Uematsu Y.), 2nd International Conference on 　　　　　Structural Integrity and Durability (ICSID 2018), Dubrovnik, Croatia (2018-9). 　　　・　Relationship between defect size and fatigue limit in Ti-6Al-4V with artificial defects 　　　　　(Han Y., Kakiuchi T., Hojo M., Fujimoto K., Nakajima M., Uematsu Y.), Proceedings of 　　　　　the Asian Pacific Conference on Fracture and Strength 2018 (APCFS 2018), Xi’an, 　　　　　China (2018-10). 　　　・　Residual stress measurement of friction stir Al/Steel dissimilar weld (Ogawa D., 　　　　　Kakiuchi T., Hashiba K., Uematsu Y.), Proceedings of the Asian Pacific Conference 　　　　　on Fracture and Strength 2018 (APCFS 2018), Xi’an, China (2018-10). 　　　・　(Plenary) Fatigue behavior of multi-directionally-forged (MDFed) light weight alloys 　　　　　(Uematsu Y.), 3rd International Conference on Materials Technology and Applications 　　　　　(ICMTA2018), Sapporo, Japan (2018-10). 　　[2017年] 　　　・　(Keynote) Crystallographic analysis of fatigue crack initiation behavior in 　　　　　coarse-grained AZ31 magnesium alloy under tension-tension loading (Uematsu Y., 　　　　　Kakiuchi T.), International Symposium on Plasticity 2017 (PLASTICITY 2017), 　　　　　Puerto Vallarta, Mexico (2017-1). 　　　・　(Keynote) Fatigue properties of selectively-melted materials (Uematsu Y.), 　　　　　The 2017 8th International Conference on Mechatronics and Manufacturing 　　　　　(ICMM 2017), Tokyo, Japan (2017-1). 　　　・　(Keynote) Microstructural Modification of Light-Weight Alloys by Friction Stir 　　　　　Processing (Uematsu Y.), BIT’s 3rd Annual World Congress of Smart Materials-2017 　　　　　Bangkok, Thailand (2017-3). 　　　・　Relationship between defect and fatigue strength in additively manufactured 　　　　　Ti-6Al-4V (Kakiuchi T., Uematsu Y., Kawaguchi R., Hojo M., Fujimoto K.), 14th 　　　　　International Conference on Fracture (ICF 14), Rhodes, Greece (2017-6). 　　　・　High cycle fatigue behavior in ultrasonic-shot-peened βeta-type Ti alloy and 　　　　　EBSD-assisted fractography of sub-surface fatigue crack initiation (Uematsu Y., 　　　　　Kakiuchi T.,Hattori K.),Engineering Integrity Society: Fatigue 2017, Cambridge, 　　　　　England (2017-7). 　　　・　Fatigue property of additively manufactured Ti-6Al-4V alloy at 250 °C (Han Y., 　　　　　Kakiuchi T., Uematsu Y., Kawaguchi R., Nakajima M., Hojo M., Fujimoto K.), 4th 　　　　　China-Japan Joint Symposium on Fatigue of Engineering Materials and Structures, 　　　　　Shenyang, Liaoning Province, China (2017-8). 　　　・　Fatigue properties of multi-directionally forged CP titanium thin foil (Ilhamdi, Kakiuchi 　　　　　T., Miura H., Uematsu Y., Nakamura Y., Shimizu T.), 3rd International Conference on 　　　　　Mechanical Engineering (ICOME 2017), Surabaya, Indonesia (2017-10). 　　　・　(Keynote) Fatigue properties of friction stir processed materials (Uematsu Y.), 2nd 　　　　　International Conference on Materials Technology and Applications (ICMTA2017), 　　　　　Tokyo, Japan (2017-10). 　　　・　High cycle fatigue properties of multi-directionally forged commercial purity grade 2 Ti 　　　　　plate (Ilhamdi, Kakiuchi T., Miura H., Uematsu Y.), 2nd International Conference on 　　　　　Materials Technology and Applications (ICMTA2017), Tokyo, Japan (2017-10). 　　　・　Fatigue behavior of resistance spot welded high strength steel sheets with defferent 　　　　　nugget(Kato Y., Kakiuchi T., Okita Y., Matsuda H., Ikeda R., Tagawa T., Uematsu Y.), 　　　　　The 8th TSME International Conference on Mechanical Engineering 　　　　　(TSME-ICoME2017), Bangkok, Thailand (2017-12). 　　　・　Compressive deformation behavior of meso pillar fabricated from magnesium alloy 　　　　　AZ80(Nakamura T., Kakiuchi T., Yogo Y., Suzuki T., Uematsu Y.), The 8th TSME 　　　　　International Conference on Mechanical Engineering (TSME-ICoME 2017), Bangkok, 　　　　　Thailand (2017-12). 　　[2016年] 　　　・　Effect of mean stress on fatigue crack initiation in magnesium alloy and 　　　　　crystallographic analysis (Tamada T., Uematsu Y., Kakiuchi T.), Proceedings of 2016 　　　　　International Conference on Advanced Material Science and Mechanical Engineering 　　　　　(AMSME 2016), Bangkok, Thailand (2016-3). 　　　・　Rotary bending fatigue behavior of selective-laser-melted Type 630 stainless 　　　　　(Invited)(Uematsu Y., Kakiuchi T., Nakajima M., Akita M.), International Conference on 　　　　　Processing & Manufacturing of Advanced Materials (THERMEC’2016), Graz, Austria 　　　　　(2016-6). 　　　・　Evaluation of fatigue crack propagation in dissimilar Al/steel friction stir welds 　　　　　(Kakiuchi T., Uematsu Y., Suzuki K.), Proceedings of the 21st European Conference 　　　　　on Fracture (ECF21), Catania, Italy (2016-6). 　　　・　Microstructural modification of non-combustible magnesium alloy by friction stir 　　　　　processing (Afrinaldi A., Uematsu Y., Kakiuchi T., Itoh R.),The 4th Asia Conference on 　　　　　Mechanical and Materials Engineering (ACMME 2016), Kuala Lumpur, Malaysia 　　　　　(2016-7). 　　　・　Fatigue limit prediction of A356 cast aluminum alloys with different castig defect sizes 　　　　　(Tajiri A., Uematsu Y., Kakiuchi T.), XVIII International Colloquium on Mechanical 　　　　　Fatigue of Metals (ICMFM XVIII), Gijon, Spain (2016-9). 　　　・　Microstructural modification of AZ91 magnesium alloy using friction stir processing 　　　　　and carbon fibers (Nakagawa S., Afrinaldi A., Kakiuchi T., Uematsu Y., Ohtani A., 　　　　　Kumabe K.,Mizutani Y.), 2016 International Conference on Materials Technology and 　　　　　Applications (ICMTA2016), Singapore (2016-10). 　　　・　Fatigue property of Ti-6Al-4V alloy fabricated by additive manufacturing (Kawaguchi 　　　　　R.,Kakiuchi T., Uematsu Y., Hojo M., Fujimoto K.), 2016 International Conference on 　　　　　Materials Technology and Applications (ICMTA2016), Singapore (2016-10). 　　[2015年] 　　　・　Effect of forging condition on fatigue behavior in AZ61 bulk nanostructured 　　　　　metal fabricated by multi-directional forging (Uematsu Y., Kakiuchi T., Nozaki 　　　　　T. and Miura H.),The 12th International Conference on the Mechanical 　　　　　Behavior of Materials(ICM12), Karlsruhe, Germany, Book of Abstracts ICM12, 　　　　 　p.135(2015). 　　　･　Fatigue behavior of Al/Steel dissimilar resistance spot welds fabricated using 　　　　　Al-Mg insert film(Ito R., Ibrahim I., Uematsu Y., Kakiuchi T., Yun K. and 　　　　　Matsuda C.), The 12th International Conference on the Mechanical 　　　　　Behavior of Materials(ICM12), Karlsruhe, Germany, Book of Abstracts ICM12, 　　　　　p.152(2015). 　　　･　Joint microstructure and fatigue behavior of ferritic stainless steel type 430 　　　　　welds with different filler metals (Akita M., Uematsu Y., Kakiuchi T., Nakajima M., 　　　　　 Agata Y. and Takino K., (International Conference on Advanced Technology in 　　　　　Experimental Mechanics 2015(ATEM'15), Toyohashi, Japan, Abstract book 　　　　　ATEM'15, p.133(2015). 　　　･　Fatigue behavior of type 630 stainless steel fabricated by selective laser 　　　　　melting method (Kawaguchi R., Uematsu Y., Kakiuchi T. and Nakajima M.) 　　　　　The 6th TSME International Coference on Mechanical Engineering, 　　　　　USB(AMM002)(2015). 　　　･　Real-time observation of small fatigue crack growth in type 329J4L duplex 　　　　 stainless steel using high-resolution digital microscope (Tsuchida K., Uematsu Y., 　 　　　　 Kakiuchi T., Akita M. and Nakajima M., The 6th TSME International Coference on 　　　　Mechanical Engineering, USB(AMM003),(2015-12). 　　　･　Fatigue crack initiation and growth of aluminum die-cast alloy ADC12 in 　　　　　laboratory air and in 3%NaCl solution (Hirata T., Nakamura Y., Shimizu T., Nakajima 　　　　M. and Uematsu Y.),The 6th TSME International Coference on Mechanical 　　　　 Engineering, USB(AMM004),(2015-12) 　　[2014年] 　　　 　　　・　Crack Initiation Analysis in AZ31 Magnesium Alloy Based on Electron 　　　　　Backscatter Diffraction (EBSD)(Uematsu Y., Kakiuchi T. and Kamiya Y.), 　　　　　20th European Conference of Fracture (ECF-20),Trondheim, Norway, 　　　　　Procedia Materials Science, Vol.3, 2014, pp.790-792.　 　　　･　Effect of Grain Orientation on Fatigue Behavior in Micro Cantilever 　　　　　Magnesium Alloy AZ31, (Kakiuchi T., Uematsu Y. Tamano S. and Mizuno S.), 　　　　　20th European Conference of Fracture (ECF-20),Trondheim, Norway, 　　　　　Procedia Materials Science, Vol.3, 2014, pp.967-972. 　　　･　Fatigue Limit Prediction of Large Scale Cast Aluminum Alloy A356,(Tajiri A., 　　　　　Nozaki T., Uematsu Y., Kakiuchi T., Nakajima M., Nakamura Y. and Tanaka H.), 　　　　　20th European Conference of Fracture (ECF-20),Trondheim, Norway, 　　　　　Procedia Materials Science, Vol.3, 2014, pp.924-929. 　　　･　Effect of Laves Phase Precipitation on Fatigue Properties of Niobium- 　　　　　containing　Austenitic Stainless Steel Type 347 in Laboratory Air and in 　　　　　3%NaClSolution (Akita M., Uematsu Y., Kakiuchi T., Nakajima M. and 　　　　 Nakamura Y.),20th European Conference of Fracture (ECF-20),Trondheim, 　　　　　Norway, Procedia Materials Science, Vol.3, 2014, pp.517-523. 　　　･　Improvement of Fatigue Properties by Solution Treatment in Nitrided Type 304 　 　　　Stainless Steel, (Suzuki K., Nakamura Y., Nakajima M., Bai Y. and Uematsu Y.), 　　　　　20th European Conference of Fracture (ECF-20),Trondheim, Norway, 　　　　　Procedia Materials Science, Vol.3, pp.627-633(2014). 　　　･　Fatigue Behavior of Dissimilar Al Alloy / Galvanized Steel Friction Stir Spot 　　　　　Welds Fablicated by Scroll Grooved Tool without Probe (Ishak I., Uematsu Y., 　　　　　Kakiuchi Y., and Tozaki Y.) Proceedings of 3rd Japan-China Joint Symposium on 　　　　　 Fatigue of Engineering Materials and Structures, pp. 47-51(2014). 　　　・　Fatigue behavior of dissimilar friction stir spot weld between aluminum and 　 　　　galvanized steel sheets fabricated by scroll grooved tool (Ibrahim B. I., Uematsu 　　　　 Y., Kakiuchi T and Tozaki Y.), International Conference on Experimental 　　　　 Mechanics　(ICEM2014), Singapore(2014). 　　　・　Fatigue behavior of Mg-Al-Sc alloy friction stir welds fabricated under 　　　　　different welding conditions (Ishida Y., Uematsu Y., Kakiuchi T., Besel M, 　　　　　Mercado A. U.　and Besel Y.), International Conference on Experimental 　　　　　Mechanics (ICEM2014), Singapore (2014). 　　　・　Effect of defect size on fatigue limit in cast aluminum alloy A356 (Takeo Y., 　　　　　Tajiri A., Uematsu Y., Kakiuchi T., Nakajima M. and Nakamura Y.), International 　　　　　Conference on Experimental Mechanics 2014(ICEM2014), Singapore(2014). 　　　 ・　Effect of aging on high cycle fatigue behavior in Type 329J4L duplex 　　　　　 stainless steel (Hikiji M, Uematsu Y., Kakiuchi T., Nakajima M. and Nakamura Y.), 　　　　　 International Conference on Experimental Mechanics 2014　(ICEM2014), 　　　　　Singapore　(2014). 　　 　・　Tensile-shear fatigue behavior in lap joint bonded by acrylic adhesive 　　　　　　(Morimoto I., Uematsu Y., Kakiuchi T., Nakajima M. and Kasuya T.), 　　　　　　International Conference on Experimental Mechanics 2014(ICEM2014), 　　　　　　Singapore(2014). 　　　・　Effect of ultrasonic shot peening treatment on fatigue behavior of AZ61 　　　　　magnesium alloy, Sanada K., Kakiuchi T., Uematsu Y., Hattori K.and 　　　　　Watanabe Y., Proceedings of the International Congress (APCF/SIF-2014), 　　　　　pp.104-108(2014). 　　　・　Effect of pile-ups of dislocations in numerical analysis of fatigue crack 　　　　　propagation using discrete dislocation method, Fukihara T., Kakiuchi., 　　　　　Uematsu Y. and Motoyashiki-Besel Y, Proceedings of the International 　　　　　Congress (APCF/SIF-2014), pp.279-283(2014). 　　[2013年] 　　　・　Effect of interlayer thickness on fatigue behavior in A5052 aluminum alloy 　　　　　with DLC/thermally sprayed WC-12Co hybrid coatings, (Uematsu Y., 　　　　　Kakiuchi T.,Teratani T., Kobayashi Y., and Takekawa M.), Surface Effects 　　　　　and Contact Mechanics XI, pp.251-259, Siena, Italy, USB flash (2013-6). 　　　・　Effects of casting defects and roller burnishing on fatigue properties of 　　　　　a cast aluminum alloy AC4CH (Nakamura Y., Masuda H., Shimizu T., Nakajima 　　　　　M. and Uematsu), Surface Effects and Contact Mechanics XI, pp.251-259, 　　　　　 Siena, Italy, USB flash (2013-6). 　　　・　Fatigue Behavior of Ti-15Mo-5Zr-3Al β-type Titanium Alloy with surface 　　　　　hardened layer induced by Annealing in Nitrogen Gas (Tamada K., Uematsu Y., 　　　　　Kakiuchi T., Akita M., Nakajima M and Nakamura Y.), Surface Effects and 　　　　　Contact Mechanics XI , pp. 261-267 Siena, Italy, USB flash (2013-6). 　　　・　Stress corrosion cracking behavior of wrought magnesium alloy AZ31 and 　　　　　AZ61 under controlled cathodic potentials (Kakiuchi T., Uematsu Y., Nakajima 　　　　　 M., Nakamura Y. and Miyagi K.), 13th International Conference on Fracture, 　 　　・　Effect of interlayer thickness on fatigue behavior of A5052 aluminium alloy 　　　　　with DLC/anodic oxide hybrid coating (Suzuki Y., Uematsu Y., Kakiuchi T., 　　　　　 Adachi M., Teratani T., and Harada Y.), International Conference on 　　　　　 Experimental Mechanics 2013, Bankok, Thailand(2013). 　 　　・　Subsurface fatigue crack initiation mechanism of shot-peened type 304 at 　　　　　the temperature of 300 C (Tamano S., Uematsu Y., and Kakiuchi T.), 　　　　　 International Conference on Experimental Mechanics 2013, Bankok, 　　　　　Thailand (2013). 　 　　・　Effect of ultrasonic shot peening on fatigue behavior of AZ61 magnesium 　　　　　alloy magnesium alloy, (Nakao F., Uematsu Y., Kakiuchi T., Xie M. and 　　　　　Hattori K.,), International Conference on Experimental Mechanics 2013, 　　　　　Bankok, Thailand (2013). 　 　　・　Effect of casting defect on fatigue behavior in large scale cast aluminum 　　　　　alloy A356, (Nozaki T., Uematsu Y., Kakiuchi T., Tajiri A., Nakajima M., Naka- 　　　　　mura Y. and Suzuki T.), International Conference on Experimental Mechanics 　　　　　2013, Bankok, Thailand (2013). 　　 [2012年] 　　　　・　Fatigue behavior in dissimilar Al/steel and Mg/steel friction stir spot welds 　　　　　 fabricated by a scroll grooved tool without probe (Y Uematsu, T. Kakiuchi 　　　　　and Y. Tozaki), Proceedings of the Asian Pacific Conference on Fracture 　　　　　and Strength - Mechanics and Materials 2012(APCFS-MM2012), Busan, Korea, 　　　　　　pp.35-36(2012). 　　　　･　Effect of solution treatment after nitriding on high cycle fatigue properties 　　　　　 of type 304 stainless steel (Y. Nakamura, K. Suzuki, T. Shimizu, M. Nakajima, 　　　　　　Y. Bai　and Y. Uematsu), Proceedings of the Asian Pacific Conference on 　　　　　 Fracture and Strength - Mechanics and Materials 2012 (APCFS-MM2012), 　　　　　 Busan, Korea, pp.171-172(2012). 　　　　･　Fatigue behavior of A5052 aluminum alloy with DLC/thermally sprayed 　　　　　 WC-12Co hybrid coatings(Y. Uematsu, T. Kakiuchi, T. Teratani, Y. Kobayashi 　　　　　 and Y. Harada), Proceedings of the 2nd International Conference on Advanced 　　　　　 Engineering Materials and Technology (AEMT2012), Chuhai, China(2012). 　　　　･　Prediction of the Fatigue Life in the Friction Stir Welds with Welding Flaws 　　　　　　Based on Nondestructive Testing (T. Kakiuchi, Y. Uematsu, E. Kondoh, 　　　　　 I. Shigematsu, T. Nomura, Y. Yamamoto, N. Imai and T. Fukuda), Proceedings 　　　　　of 8th Euromech Solid Mechanics Conference (ESMC2012), Graz, Austria 　　　　　　(2012). 　　　　･　Effects of Temperature and Frequency on Fatigue Behavior of Metastable 　　　　　 Type 304 Stainless Steel (Y. Nakamura, M. Nakajima, K. Isono, T. Shimizu, 　　　　　 Y. Uematsu), Proceedings of 8th Euromech Solid Mechanics Conference 　　　　　 (ESMC2012), Graz, Austlia (2012). 　　　　・　Fatigue Test of Small Sized AZ31 Magnesium Alloy using Micropillar 　　　　　　Specimen (S. Mizuno, T. Kakiuchi and Y. Uematsu), Advances in Fracture 　　　　　 and 　Damage Mechanics XI, 165-168, 11th International Conference on 　　　　　　Fracture and Damage Mechanics Materials, Xi'an, China(2012). 　　　　・　Fatigue Behavior of A356 Cast Aluminum Alloy Microstructurally Modified by 　　　　　　Friction Stir Processing under Low Strain Rate Condition (T. Kakiuchi, Y. 　　　　　　Uematsu and Y. Tozaki), Advances in Fracture and Damage Mechanics XI, 　 　　　　 169-172, 11th International Conference on Fracture and Damage 　　　　　　Mechanics Materials,　Xi'an, China(2012). 　　　　・　Fatigue Properties of Solution-treated Type 304 Stainless Steel after 　　　　　　nitriding (Y. Nakamura, M. Nakajima, T. Shimizu, K. Suzuki, Y. Bai and 　　　　　　Y. Uematsu), Advances in Fracture and Damage Mechanics XI, 217-220, 　　　　　　 11th International 　Conference on Fracture and Damage Mechanics 　　　　　　Materials, Xi'an, China(2012).　 　　　　・　Fatigue Behavior of Dissimilar A6061/Rolled Steel (SS400) Friction Stir 　　　　　　Welds (Y. Uematsu, T. Kakiuchi and E. Kondoh), Proceedings of ISEM- 　　　　　　ACEM-SEM-　7th ISEM'12 Taipei, USB flash drive(2012). 　　　　・　Effect of Machinery Cutting Process on Fatigue Behavior of Magnesium 　　　　　　Alloy AZ61(T. Kakiuchi, Y. Uematsu, Y. Kato, M. Xie and M. Kiyohara), 　　　　　　Proceedings of　ISEM-ACEM-SEM-7th ISEM'12 Taipei, USB flash drive 　　　　　　(2012). 　　　　・　Fatigue Properties of Metastable Type304 Stainless Steel Depending on 　　　　　　Test Temperature and Frequency(Y. Nakamura, K. Isono, M. Nakajima and 　 　　　　　Y. Uematsu), Proceedings of ISEM-ACEM-SEM-7th ISEM’12 Taipei, USB 　　　　　　flash drive(2012). 　　　　[2011年] 　　　　・　Hydorogen Embrittlement Type Stress Corrosion Cracking Behavior of 　　　　　　Wrought Magnesium Alloy AZ31 (Y. Uematsu, T. Kakiuchi, M. Nakajima), 　　　　　　11th International Conference on the Mechanical Behavior of Materials 　　　　　　(ICM-11), Como lake, CD-ROM(2011). 　　　　・　Effect of Film Elastic Modulus on Fatigue Behavior of DLC-Coated Wrought 　　　　　　Magnesium Alloy AZ61 (T. Kakiuchi Y. Uematsu, T. Teratani and Y. Harada), 　　　　　　11th International Conference on the Mechanical Behavior of Materials 　　　　　　(ICM-11), Como lake, CD-ROM(2011). 　　　　・　Effect of Quantity of Martensitic Transformation on Fatigue Behavior in Type 　　　　　　304 Stainless Steel (M. Nakajima, Y. Uematsu, T. Kakiuchi, M. Akita and 　　　　　　K. Tokaji),11th International Conference on the Mechanical Behavior of 　　　　　　 Materials(ICM-11), Como lake, Italy, CD-ROM(2011). 　　　　・　Microstructural Changes of High-Chromium Ferritic Stainless Steel 　　　　　　Subjected to Cyclic Loading in 475℃ Embrittlement Region (M. Akita, T. 　　　　　　Kakiuchi and Y. Uematsu),11th International Conference on the Mechanical 　　　　　　Behavior of Materials(ICM-11), Como lake, Italy, CD-ROM(2011). 　　　　・　 High Cycle Fatigue Behavior of Ultrasonic Shot Peened Type304 Stainless 　　　　　　Steel at Room Temperature and 573K (E. Kondo, Y. Uematsu, T. Kakiuchi and 　　　　　 N. Hasegawa), Proceedings of 5th Internatinal Conference on Very High 　　　　　　Cycle Fatigue(VHCF5), 263-268, Berlin, Germany (2011). 　　　　・　Fatigue Crack Propagation Behavior of AZ61 Extruded Magnesium Alloy under 　　　　　　Controlled Humidity (Y.Uematsu, T. Kakiuchi, M. Nakajima and H. Makino), 　　　　　　Proceedings of the International Conference on Advanced Technology in 　　　　　　 Experimental Mechanics 2011(ATEM'11), Kobe, CD-ROM(2011). 　　　　・　Effects of Aneealing in Nitrogen Gas on Fatigue Behavior of Type304 　　　　　　Stainless Steel (Y. Bai, Y. Uematsu, M. Akita, T. Kakiuchi, M. Nakajika and Y.　 　　　　　　 Nakamura), The 2nd Japan-China Joint Symposium on Fatigue of Engineering 　　　　　　 Materials　and Structures, China, CD-ROM(2011). 　　　　[ページ先頭へ] 　岐阜大学　工学部　機械工学科（機械システム工学科）　植松研究室 　〒501-1193 岐阜県岐阜市柳戸1-1 Copyright (C) Uematsui Laboratory All Rights Reserved.